Home About Us Contact Us Feedback
Home » Products » G.E. / Tuflite Polycarbonate Roofing Sheets / Multi Wall / Compact & E mbossed Clear Sheets
 

Our Products

01. Sandwich Panel Sheets
02. Colour Coated sheets
03. Tilara / Mamata Acrylic Sheets
04. Tuflite Polycarbonate Roofing Sheets
05. Bayer - Makrolon
06. Tuff Roof P.V.C. Tiles
07. Garware Nylon Ropes and Slings
08. Everest Asbestos Roofing Sheets
09. Roof Turbo Ventilators
10. Plastic Water Tanks
11. Fibreglass Roofing Sheets
12. EURO GUARD HYSQUARE PVC Rainwater Gutter System
13. PVC Roofing Sheets
14. TATA Shaktee CG Sheet
15. Other Products
16. HINDALCO Aluminium Corrugated Sheets
17. PVC / FRP Doors
 

G.E. / Tuflite Polycarbonate Roofing Sheets / Multi Wall / Compact & Embossed Clear Sheets

 

Multi Wall

 
  Product Range: TUFLITE

Description : Multiwall Polycarbonate sheet with UV Coating.

Product : Tileglass

Description : Textured Multiwall Polycarbonate sheet for diffused Light.
 
TECHNICAL DATA

UV Protection TUFLITE multiwall sheets restrict the transmission of more than 99.9 % of harmful UV barrier protects the sheet from physical degradation and discoloration.
The sheets remain stable under extreme temperature conditions ( -40 C to + 120 C)

Fire Performance

TUFLITE Multiwall is suitable for use in areas prone to fire hazards , inherently the sheets are self extinguishing and do not aid flame spread . These sheets conform to most international standards on fire retardance . TUFLITE Multiwall sheets do not release toxic fumes and hence pose no hazard to human life in case of fire.

Wind Load

TUFLITE Multiwall sheets are suitable for use in high wind load areas .

Handling , Storage and Cleaning
  • Storage sheets on a flat surface (with the longest length at the bottom).
  • Ensure sheets are not stored in direct sunlight.
  • When stored in a stack , sunlight may cause the sheet to heat up and distort. Masking film may be difficult to remove.
  • Ensure sheets are protected against atmospheric conditions.
  • Use timber bearers to support sheets.
  • Rinse sheet with lukewarm water . Wash with mild soap or detergent and a soft cloth or sponge. hose down thoroughly.
  • Dry with soft cloth to prevent water marks.
  • Do not allow moisture to enter the flutes.
  • Ensure storage area is well ventilated.
Chemical Resistance

TUFLITE Multiwall is affected by : benzene , petrol , ketones , acetone , phenols , chlorinated and aromatic hydrocarbons and petroleum based paints , abrasive cleaners and solvents.
 
Standard Dimensions
Structure Thickness (mm) Weight/Sq.m. Width (mm) Length (mm)
Twin Wall 4.5mm 1.1kg 1210-2100mm 5900 – 11800mm
  6.0mm 1.3kg 1210-2100mm 5900 – 11800mm
  8.0mm 1.5kg 1210-2100mm 5900 – 11800mm
  10.0mm 1.7kg 1210-2100mm 5900 – 11800mm
         
Triple Wall 10.0 mm 2.0kg 1210 – 2100mm 5900 – 11800mm
  16.0mm 2.7kg 1210 – 2100mm 5900 – 11800mm
         
6 Walled 16.0mm 2.8kg 2100mm 5900 – 11800mm
  20.0mm 3.1kg 2100mm 5900 – 11800mm
         
Honey Comb 16.0mm 2.7kg 2100mm 11800mm
 
Properties
Characteristics Value Measurement Standard

Mechanical

     
Yield Stress 66 Mpa ISO 527
Stress at Break 70 Mpa ISO 527
Yield Strain 6.2 % ISO 527
Strain at Break 120 % ISO 527
Tensile Modulus 2200 Mpa ISO 889
Impact strength 80 kJ/m2 ISO 7391
Izod Notched 90 kJ/m2 ISO 180
Hardness 110 N/mm2 ISO 180
 

Physical

     
Density 1.2 g/m3 ISO 1183
Refraction Index 1.58 n ISO 489
Moisture Absorption 0.30 % ISO 62
 

Thermal

     
Linear thermal expansion 0.65 10-4 / K ISO 11359
Thermal Conductivity 0.20 W (m-K) ISO 8320
VICAT Softening Point 146 C ISO 306
HDT 137 C ISO 75
Service Temp -40 to + 120 C  
 
The System Explained

TUFLITE multiwall versatile polycarbonate glazing system is advanced in design yet simple to install. The sheets simply slot into an H-Bar ready for fixing to the structure . A two piece H-Bar is also available for increased flexibility . The glazing bar allows for thermal expansion and eliminates the need for penetration through the sheet, hence the structure is 100% water tight.
 
 

Accessories:

 
Aluminium Two Piece H-Bar

Standard Colours: Mill Finish

Standard Lengths: 3.66m
 
 
Edge U Sealing Profile Polycarbonate

Standard Colour: Clear , Bronze , Opal

Standard Length: 1210mm and 2100mm

Seals the edges of Multiwall sheet to avoid entry of water/dust
 
 
Joint H Profile Polycarbonate

Standard Colour : Clear,Bronze,Opal

Standard Length : 5800mm and 11800mm

To cover and join 2 Multiwall sheets from its edges.