HINDALCO Aluminium Corrugated Sheets |
|
 |
Everlast, a Hindalco brand launched in December 2002, is made of aluminium and is ideal for all roofing and cladding needs. It is easy to use, durable and economical to work with. Using aluminium for roofing has many benefits. Some of them are:
Aluminium roofing sheets are extremely light with high-strength-to-weight ratio. |
|
|
The metal is becoming a popular choice for use in installations and buildings. It is corrosion-resistant in almost any kind of environment. Even in highly-corrosive industrial environments, it is resistant to fumes and vapours of organic compounds and to chemicals like ammonia, carbon-dioxide and acids like hydrochloric acid, nitric acid and sulphuric acid. This corrosion-resistant property gives the metal a long life and keeps it looking good throughout its life. |
|
 |
The shine and brightness of aluminium livens its surroundings and because it doesn't stain, discolour or rot, it looks bright and shiny for a long time. Aluminium corrugated sheets can take a variety of finishes, colours and textures, which protect it and add further to its appearance.
An alumunium structure can be easily dismantled, transported and re-assembled to a new location.
Though the metal is a good conductor of heat, its high reflectivity of radiant heat and light (75 to 80 |
|
new, 60 per cent after several years) keeps the interiors of an aluminium building from five to eight degree celsius cooler in summer while its low emission rate cuts heat loss during winter.
It is easy to maintain and can be washed easily. |
|
Physical properties |
Alloy (AA) |
Temper |
UTS (mpa) |
Yield stress
(0.2% proof stress) |
Elongation % |
Min |
Max |
3003 |
H18 |
170 |
- |
165 |
1 |
3105 |
H18 |
190 |
- |
165 |
1 |
8011 |
H18 |
175 |
- |
165 |
2 |
|
|
Chemical composition |
Alloy (AA) |
Al |
Cu |
Mg |
Si |
Fe |
Mn |
Zn |
Ti |
Cr |
Remarks |
8011 |
Remainder |
0.20 |
0.10 |
0.60 0.95 |
0.60 0.95 |
0.10 |
0.20 |
0.20 |
0.20 |
- |
3003 |
Remainder |
0.10 |
0.10 |
0.60 |
0.70 |
0.80 1.20 |
0.20 |
0.20 |
- |
- |
3105 |
Remainder |
0.30 |
0.20 0.80 |
0.60 |
0.70 |
0.2 0.8 |
0.40 |
0.10 |
0.20 |
- |
5052 |
Remainder |
0.10 |
1.70 2.60 |
0.60 |
0.70 |
0.50 |
0.20 |
- |
0.25 |
Cr+Mn=0.50 |
|
|
Other typical properties |
Thickness
Circular corrugated sheet: 0.30 — 1.22 mm
Industrial troughed sheets: 0.40 — 1.63mm
Curvomatic troughed sheets: 0.40 — 1.22mm
Width
Hindalco's aluminium sheets are available in the following widths (unit mm): |
Troughed |
Overall |
Effective |
Ind. 6 |
795 |
750 |
Ind. 7 |
920 |
875 |
Ind. 8 |
1044 |
1000 |
|
Circular corrugated |
Overall |
Effective |
10/3 |
800 |
750 |
16/3 |
1250 |
1200 |
12/3 |
950 |
900 |
|
|
Length
Between 1500 to 6500 mm. Other lengths may be provided on request.
Young's Modulus
Young's Modulus or modulus of elasticity for aluminium is 7.0x104 mpa.
Finish
Everlast is available in mill and stucco finish. Colour coated sheets can be provided on request.
Curvomatic and tiled profile sheets are offered.
Workability
Everlast can be bent to the required shape. It is subject to the bend radii of the alloy. |
|
Troughed sheets |
 |
Thickness (mm) |
Kg/Sq.m. |
Kg/m |
Section modulus (Z) per pitch mm3 |
Moment of inertia (I) per pitch mm4 |
Ind-6
(795mm) |
Ind-7
(920mm) |
Ind-8
(1044mm) |
1.20 |
4.33 |
3.43 |
3.97 |
4.50 |
1739 |
41383 |
0.90 |
3.23 |
2.56 |
2.96 |
3.36 |
1310 |
31099 |
0.70 |
2.50 |
2.00 |
2.31 |
2.62 |
1037 |
24379 |
0.65 |
2.31 |
1.83 |
2.12 |
2.41 |
952 |
22346 |
0.55 |
1.96 |
1.57 |
1.82 |
2.07 |
823 |
19296 |
|
|
Permissible loading |
Purlin
spacing L(mm) |
1.22mm |
0.91mm |
0.71mm |
0.56mm |
914 |
|
1066 |
507 |
636 |
505 |
1245 |
943 |
743 |
590 |
1219 |
|
600 |
454 |
357 |
284 |
700 |
530 |
418 |
332 |
1524 |
|
384 |
290 |
229 |
182 |
448 |
339 |
267 |
212 |
1829 |
|
266 |
202 |
159 |
126 |
311 |
236 |
186 |
148 |
2134 |
|
181 |
136 |
106 |
84 |
229 |
173 |
136 |
108 |
|
|
Circular
corrugated sheets |
 |
Thickness
(mm) |
Kg/Sq.m. |
Kg/mtr |
Section
Modulus
(Z) per pitch mm1 |
Moment
of Inertia
(I) per pitch mm4 |
10/75
(1250 mm) |
18/75
(950 mm) |
10/75
(800 mm) |
1.20 |
3.72 |
4.71 |
3.66 |
3.01 |
462 |
4670 |
0.90 |
2.77 |
3.51 |
2.68 |
2.25 |
348 |
3466 |
0.70 |
2.14 |
2.74 |
2.09 |
1.75 |
274 |
2697 |
0.65 |
1.98 |
1.59 |
1.89 |
2.49 |
251 |
2469 |
0.55 |
1.68 |
2.16 |
1.65 |
1.38 |
217 |
2123 |
0.45 |
1.38 |
1.10 |
1.31 |
1.72 |
175 |
1704 |
0.35 |
1.07 |
0.85 |
1.02 |
1.34 |
137 |
1321 |
|
|
Permissible
loading |
Purlin
spacing L(mm) |
1.22mm |
0.91mm |
0.71mm |
0.56mm |
914 |
|
432 |
321 |
250 |
197 |
551 |
416 |
327 |
259 |
1219 |
|
182 |
135 |
105 |
83 |
310 |
234 |
180 |
146 |
1524 |
|
93 |
69 |
54 |
43 |
197 |
150 |
118 |
93 |
1829 |
|
54 |
40 |
31 |
25 |
129 |
96 |
74 |
59 |
2134 |
|
34 |
25 |
20 |
16 |
81 |
60 |
47 |
37 |
|