Polycarbonate Base-plates

Polycarbonate Base-plates

Base plates are custom formed polycarbonate sheets to match the profiles of various types of roofing sheets and with a central cone to facilitate the mounting and fixing of wind powered ventilators.

While these base-plates provide ease of installation on the roof, they also offer a wide range of other benefits:

  • Base-plates are available in standard width of most industrial profiles in regular size and in a standard length of 1.70 Meters.
  • The base-plates are made from 2mm thick Polycarbonate embossed sheets.

Features

  • Allow natural light to enter the building or shed during daytime thereby helping to reduce the use of artificial lighting. This reduces cost of electricity.
  • Are virtually unbreakable and hence can be stored, transported and handled easily.
  • Fire-retardant (self-extinguishing) material, hence does not contribute to fire risk.
  • The base-plates are resistant to UV Radiation of the sun and hence are weather resistant and durable, lasting for for a long time.
  • There are available in matching profile with most conventionally used roofing profiles for easy ovarlapping and water-light installation.
  • They are economical and provide value-for-money long term benefits.

Polycarbonates Louvers

Polycarbonates Louvers

Features

  • Louvers play an important role in ensuring effective ventilation of a building. Wind-driven ventilators or exhaust fans suck out of air from within the building or shed. This causes a drop in pressure within the building. Louvers provide the vents from which fresh air can enter the system and provide effective circulation of air
  • In the absence of louvers, there would be a drastic drop in the efficiency of ventilators of exhaust fans
  • Polycarbonate Louvers are available in matching profile with all conventional industrial roofing profiles to ensure ease of installation along with vertical cladding sheets
  • They ensure proper circulation
  • Provide daylight thereby reducing power consumption for lighting during day time
  • They are durable virtually unbreakable and weather resistant, natural light during day time, thus reducing lighting load
  • They are resistant to high temperature and last long
  • Polycarbonate louvers are available in profile and width matching to conventional industrial profiled sheets used for cladding. These louvers are available in standard length of 1.7 m
  • The Louvers are made from 2 mm thick Polycarbonate embossed sheets

Polycarbonate 'U' Clip / Profile

Polycarbonate 'U' Clip / Profile

U Clip Polycarbonate profile is designed to seal the edge of the polycarbonate sheets. Applied after the solid/vented aluminum tape it close the edge to prevent dust, water and bug get access to the hollow space. It also provides a clear finish to the edge of the sheet. The profile can be easily cut. In order to prevent dust and dirt penetrating inside the ribs, the exposed top and bottom ends (the width side of a sheet) must always be sealed first with the solid aluminum tape on the top and vent tape at the bottom.

Design

Standard Colors - Clear, Bronze, Green & Blue

Standard Thickness - 6/10mm

Available length - 3/6mtr

Features

  • Light weight
  • Keep consistent with the PC sheet in physical performance
  • Good waterproof performance
  • Good weather resistance and UV protection
  • Simply installed

Polycarbonate 'H' Profile

Polycarbonate 'H' Profile

Polycarbonate Profiles used as connectors between pc sheets and edge sealing. It not only makes the installation fast and convenience. but also can effectively prevent the sheet broken when make holes in the sheet. Using the PC connectors also can make the waterproof dealing more simple and easier.

Features

  • Light weight
  • Keep consistent with the PC sheet in physical performance
  • Good waterproof performance
  • Good weather resistance and UV protection
  • Simply installed